The signal you are attempting to record is copy prohibit-ed. For recom-mended recordable DVD discs, please refer to page 3 in your owner’s manual. DVD-R, DVD+R, DVD-RW and DVD+RW, DVD-RAM can be used to record on your DR-MV150B. Note that some DVD/VCR will not feed the VCR through these so you may need to use composite video and audio. InputCoaxialVideoCoaxialAudio.InputCoaxialVideoCoaxialAudio. Please see page 22 in the Instruction book. Connect DVD/VCR to TV with HDMI or if not available component video and audio cables. ![]() This webpage will give you a diagram for you, depending on your choices. Secure the coaxial cable from the cable box output jack to the 'Coax IN' jack on the back of the DVD/VCR combo by turning the threaded coupler on each end of the cable clockwise around the jacks. The manual that came with the tv shows how to connect various devices to the inputs on the tv, where is the manual that came with it? If you do not have, you can go to Lg.com and pull up the manual for the tv. It will start with the screen size, then product line (ie 42LM24xx, or such). It will state on the back label of the TV what the model# is. If it has a Coax input for Antenna/Cable, the TV has to have what is called a NTSC tuner in it, to receive the Channel 3 output from the VCR combo, but you would only be able to watch VHS tapes.Īlso that model# you gave for the TV is not the correct model#. It will not play VHS cassettes that are Pal from Europe of other countries. If you only have HDMI, Component, or the 1/8" jack for component, and no Composite, you cannot connect the VCR/DVD combo to the TV. Place a cleaning CD into the disc drive of the DVD player. It will play only VHS Cassettes from the USA. Shop online at Call us at 480.207.1511 to ask us anything or to order something. You would connect that output to the Component input on the TV, then the Red & White audio for the VCR/DVD combo to the Red & White Audio input for the component input on the TV. We hope this video helped you connect your VCR to you TV. If you have the Red, Green, Blue for Video, on the VCR/DVD combo, that is called a "Component" connection. Note: You do not actually have to have a VCR or DVD. At the date/time of the set recording, the TV Box will automatically tune to that channel and the following message will be displayed: VCR Recording in Progress. ![]() Your new Converter box will come with a second coaxial wire and a remote control. Supplies: You will need your analog TV, analog VCR, the antenna you have been using (indoor or outdoor), and the coaxial wire that currently connects your antenna to your VCR (as pictured on the right). Select Record and confirm it by pressing the OK button. Set-up 1: Watch and Record One Channel at a Time. Again, if there is a output that is Red, White, Yellow, which are called Composite connections, your TV has to have the same connections, but labeled "Input". Use the arrow buttons on your remote to highlight the recording option.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |